Product Description
PTO (Power Take Off) for DFAC (Xihu (West Lake) Dis.feng Truck ) Duolika SDQ25-67LGQ1 For Transmission Gearbox 170571-C22112 /5.5 Teeth 25
Xihu (West Lake) Dis.feng Truck Part Assembly
Gearbox PTO
POWER TAKE-OFF UNIT
Detailed Photos
Xihu (West Lake) Dis.feng DFAC Truck Power Take off (PTO Assembly)Xihu (West Lake) Dis.feng (DFAC DFCV) Truck PtoImages of Xihu (West Lake) Dis.feng Truck Pto
Images of Xihu (West Lake) Dis.feng Truck Pto
Xihu (West Lake) Dis.feng DFAC Truck Power Take off
Power Take Off (PTO) for China trucks
DFAC Duolika PTO SDQ25-67LGQ1 For Gearboox 170571-C22112/5.5 Teeth numbers 25
Images of Dfac Duolika Pto For Gearboox 170571-c22112
Product Description
FAW Truck power take off (FAW)
Jac Truck Xingrui series power take off (JAC)
WanLiYang series power take off (WLY)
ISUZU Truck power take off (ISUZU PTO)
SINOTRUCK CZPT PTO power take off
JMC Truck power take off (JMC PTO)
FOTON Truck power take off (FOTON PTO)
New energy Electric series power take off
Vacuum control PTO
Pneumatic control PTO
Electric control PTO
Remote manual PTO
Fast Power Take-off ( PTO) For Hydraulic Gear Pump Crane ,( Oil Pump ,Fuel Pump Tanker Bowser Special Vehicle Gearbox PTO ) Assembly CZPT CZPT truck transmission gearbox power take off QD60 PTO
China Truck Power Take-off PTO Assembly ( Fast 8JS85E 9JS119TA RTO-11609B RT-11509F 12JS160TA 12JD160TA 12JD180TGearbox Transmission SDQ211/70 )
A detailed description of the original production and operation of the full power take-off device with sandwich type power take-off is described.
| Sandwich type Power take-off List of main technical parameters | |||||||||
| Serial number | Map number | Total speed ratio | Rated power | Maximum output torque | Output interface form | Output interface location size | Indication switchform | gas Pipe interfacesize | AdaptationTransmission Model |
| One | QJQ01-571 | 0.702 | 160kW | 6-01 connector. | |||||
| Tell: tictrucks HangZhou City ZheJiang Province China | ||||
| Gearbox Factory | Gearbox Transmission Model tictrucks |
SZ OBM Model | Brief data PTO | |
| PTO ODM MODEL | Truck brand | |||
| HaChi Gearbox | C171757121-8C CA6-75AB19 CATS6-62 CA6T-123 6T120 JS6-550 TS6-53(Direct) | -8C | SDQ12/68 | FAW |
| HangZhou | C1 | FAW | ||
| HaChi Gearbox | TZ17-449 CA6T-138(FAW Eaton) | 6-74 | SDQ15/75 | FAW |
| Xihu (West Lake) Dis.feng | 17V20 17V70–Q17421(HangZhou) JC5-20T23(HangZhou) 17G0A8-LB27 17G0A88-QB80 17G1A8-20 17G0A5-EG05-B | SDQ23/30 | Furika | |
| LG | LG520Q3 LG525Q Mengwo170571-Q17571 MW525CL 17G0AB02 WLY520 | 525 | SDQ23/32 | FOTON Furika |
| SDQ33/32 | ||||
| YY | SYC07 170571-C64-E31121 TC5-30HKA20(Tangchi) TC5-30HFE9(Tangchi) YC5-30V06 LG535QHZJB1 | 1061 | SDQ23/37 | FOTON Furika |
| WLY | WLY5TS32-73–LD4-90651 17KW1-N9-N9-Q17421 | |||
| LC JAC | 2830.5 | SDQ42/27 | IVECO NAVECO | |
| LC JAC | LC6T35 | SDQ50/35 | JAC | |
| LC JAC | LC6T46(A2Q25) LC6T450MT(AZQ28) WLYZ6S46( ) | 646 | SDQ50/45 | FOTON AUMARK |
| WLY | WLY6S46 | 646 | SDQ50/69 | |
| LC JAC | LC6T540 15CO7571 | SDQ50/63 | JAC | |
| LC JAC | LC5T97 LC5T30( 6teeth) | 5T97 | SDQ50/71 | |
| LC JAC | LC5T400M1(A2Q08) | 5T35 | SDQ50/74 | FOTON Oling |
| NISSAN ZF5S400V | SDQ51/44 | NISSAN | ||
| ZheJiang | MSB-5M(A2Q05) LC5T88(6 teeth) | ISUZU QINGLING | SDQ51/62 | ISUZU QINGLING |
| ZheJiang | MSB-5M(A2Q05) LC5T88(6 teeth) | ISUZU QINGLING | SDQ51/63 | ISUZU QINGLING |
| DN3-70030-E0 6MT1420 | DN3 | SDQ51/65 | ISUZU QINGLING | |
| ISUZU QINGLING | MSB-5S/5M/5SM 5MT1280JD JC526T3D | 1571 5T88 | SDQ51/74 | JMC small |
| WLY | WLY5TS32C-58-32 | Xihu (West Lake) Dis.feng | ||
| WLY5TS32-31-32 | Xihu (West Lake) Dis.feng | |||
| HangZhou | JC528T8 | 1571 5T88 | SDQ51/67 | JMC |
| ZheJiang | ISUZU MRB6P( EURO3) | SDQ52/74 | ISUZU QINGLING | |
| ZheJiang | MRB6Q MLD6Q | 5T ISUZU | SDQ52/77 | ISUZU QINGLING |
| FAST | 8JS85E 17JK-G18569(JiangKai) | 85E | QD40A | FAST, Xihu (West Lake) Dis.feng |
| RT-11609A RT-11509C | SDQ211/70-A | Xihu (West Lake) Dis.feng, FAW,Xihu (West Lake) Dis.n IVECO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN Xihu (West Lake) Dis. Runze Special Vehicle |
||
| 17G0A9-22 9JS135T-B | SDQ211/70-1 | |||
| 9JS119T-B(170571-K14E3) | SDQ211/70-3 | |||
| 9JS119TA | SDQ211/70-4 | |||
| RTO-11609B RT-11509F | SDQ211/70-5 | |||
| 12JS160TA | SDQ212/70-1 | Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.n IVECO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN | ||
| 12JD160TA 12JD180T | SDQ212/70-2 | |||
| A5J38T | QC20A | FOTON | ||
| NAVECO | 17H30 | tictrucks | IVEVO NAVECO | |
Power take-off products
Model list of power take-off
FAW Xihu (West Lake) Dis. power take off (FAW PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-YQ12/68 |
1.24 |
250 |
CA6T-123/TS6-53 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-YQ12/72 |
1.199 |
250 |
CA6T-123/TS6-53 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-YQ13/70 |
1.08 |
300 |
CATS6-75A/1700940-680 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-YQ15/75 |
1.006 |
350 |
CATS6-75(74), TZ1700940H4G,CA6T-138 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-YQ15/52 |
1.179 |
400 |
CA6T138 |
Internal spline / flange |
Pneumatic (dynamic clutch) |
Xihu (West Lake) Dis.feng series power take off (DF PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-DF21/33 |
1.044 |
250 |
17C-00030,17G0A4-08, |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-DF22/47 |
1.2 |
600 |
Dt0690 overdrive |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-DF22/47-A |
1.03 |
600 |
Dt0690 overdrive |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-DF24/42 |
1.2 |
600 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-DF24/42-B |
1.03 |
450 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-DF24/45 |
1.2 |
600 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-DF24/45-B |
1.03 |
450 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-DF24/65 |
1.06 |
400 |
DF6S-750 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-DF24/64 |
1.06 |
400 |
DF6S750/DF6S650 |
Internal spline / flange |
Pneumatics |
|
10 |
SDQ-DF24/69 |
1.211 |
350 |
17K1/17KT6K-00030, 17K17-00030/17G1A7-15, 17K23-00030/17G0A7-15 |
Internal spline / flange |
Pneumatics |
|
11 |
SDQ-DF25/63 |
1.23 |
350 |
17G1A7-41/17F40(44/62) /17g0a7-21 (41) / jiangft 650H |
Internal spline / flange |
Pneumatics |
|
12 |
SDQ-DF26/31 |
1.45 |
350 |
DC6J70T/17G0A3-08(09/15/ 25/96)/Zqc6t-75 / 750 |
Internal spline / flange |
Pneumatics |
|
13 |
SDQ-DF27/21 |
1.845 |
350 |
DC85JTZ/17G0Z56-571/17G 0A3-33(35/36)/17G571-N9 002/14G0A3-32(34) /DC6J85TZ |
Internal spline / flange |
Pneumatics |
|
14 |
SDQ-DF27/53 |
1.35 |
350 |
17G0A9-Z67D/DC7J100TB/1 7G0A9-45(-24-00030) |
Internal spline / flange |
Pneumatics |
|
15 |
SDQ-DF27/55 |
1.216 |
300 |
17g0a3-32 (33 / 34 / 35 / 36) straight Connecting gear / dc6j85tz (direct gear) |
Internal spline / flange |
Pneumatics |
|
16 |
SDQ-DF27/65 |
1.07 |
350 |
DC7J100TC,17G0A9-Z66D |
Internal spline / flange |
Pneumatics |
|
17 |
SDQ-DF27/66 |
1.26 |
350 |
Dc6j85tz (overdrive) /17G0A3-54/170571-A9000 |
Internal spline / flange |
Pneumatics |
|
18 |
SDQ-DF28/55 |
1.3 |
400 |
17GOA3-38/17N29-00030 |
Internal spline / flange |
Pneumatics |
|
19 |
SDQ-DF28/65 |
1.55 |
350 |
Dc7j120tb (overdrive) /01-00030 |
Internal spline / flange |
Pneumatics |
|
20 |
SDQ-DF28/72 |
1.84 |
350 |
Dc7j120tc (direct gear) /01-00030 |
Internal spline / flange |
Pneumatics |
Jac Xingrui series power take off (JAC)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-XR50/35 |
1 |
300 |
LC6T55 WLY6TS55 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-XR50/45 |
1.1 |
280 |
LC6T46/LC6T450 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-XR50/60 |
1.1435 |
300 |
LC6T540 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-XR50/63 |
1.11 |
300 |
LC6T540/15CO7571 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-XR50/65 |
1.6433 |
250 |
ML642A-A9 |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-XR50/67 |
1.1541 |
250 |
ML532A |
Internal spline / flange |
Pneumatic / manual |
|
7 |
SDQ-XR50/69 |
1.1 |
280 |
LC6T46/LC6T450 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-XR50/71 |
1.17 |
200 |
LC5T97/LC5T30 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-XR50/74 |
1.03 |
200 |
LC5T35/LC5T40 |
Internal spline / flange |
Pneumatics |
|
10 |
SDQ-XR23/55 |
1.12 |
300 |
LC6T450M1 |
Internal spline / flange |
Pneumatic / manual |
|
11 |
SDQ-XR37/77 |
1.55 |
200 |
ML532C |
Internal spline / flange |
Pneumatic / manual |
Qingling CZPT series power take off (Isuzu PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WS51/62 |
1.3 |
150 |
Msb-5m / starray lc5t88 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WS38/63 |
1 |
150 |
Msb-5m / starray lc5t88 |
Internal spline / flange |
Pneumatic / manual |
|
3 |
SDQ-WS32/64 |
1.095 |
300 |
MYY-6S |
Internal spline / flange |
Pneumatic / manual |
|
4 |
SDQ-WS35/74 |
1.63 |
180 |
MSB-5M/MSB-5S/MSB-5SM/LC5T88
LC5T25/LC5T255M3/LC5T28 |
Internal spline / flange |
Pneumatic / manual vacuum |
|
5 |
SDQ-WS52/77 |
1.18 |
250 |
MLD-6Q/MLD6A |
Internal spline / flange |
Pneumatics |
JMC series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-GT32/65 |
1.26 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
2 |
SDQ-GT51/67 |
1.2 |
200 |
JC5T28/5T26.5/MTI280JD |
Internal spline / flange |
Pneumatic / manual |
|
3 |
SDQ-GT32/65-A |
1.315 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
4 |
SDQ-GT32/65-B |
1.09 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
5 |
SDQ-GT32/65-C |
1.26 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
ZF series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-ZF51/38 |
1.077 |
300 |
ZF6S500/ZF6S600/ZF6S558 ZF6S508/ZF6S458 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-ZF51/44 |
1 |
250 |
ZF5S400 |
Internal spline / flange |
Manual |
|
3 |
SDQ-ZF48/39 |
1.063 |
250 |
ZF5S408/ZF5S328 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-ZF211/65 |
0.772 |
650 |
TraXon12 |
Internal spline / flange |
Pneumatics |
Fast PTO power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-FS212/70 |
0.94 |
600 |
12JSD160TA |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-FS212/70-A |
0.78 |
600 |
12JSD160TA |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-FS19/31 (QD40A) |
1.09 |
400 |
8JS75 |
Internal spline |
Pneumatics |
|
4 |
SDQ-FS24/37 ( QCZ70A) |
0.93 |
600 |
6J80T |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-FS211/60 |
1.1 |
350 |
6DS40TB-D/6DS60TB-D |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-FS211/70 |
0.94 |
600 |
Fuller / fast / rt-11509c 8JS100S/17G0A9-22 |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-FS211/70-A |
0.78 |
600 |
Fuller / fast / rt-11509c 8JS100S/17G0A9-22 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-FS34/29 |
400 |
8JS75 |
Internal spline / flange |
Pneumatics |
WanLiYang series power take off (WLY PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WL24/37 |
1.176 |
250 |
10H30 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WL24/38 |
1.077 |
300 |
6G55 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-WL24/40 |
1.333 |
300 |
6G40A |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-WL31/39 |
1.1 |
300 |
6G40A |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-WL24/43 |
1.087 |
300 |
5G40 |
Internal spline / flange |
Pneumatic / manual / vacuum |
|
6 |
SDQ-WL24/44 |
1.043 |
300 |
6G40B |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-WL24/59 |
1.094 |
300 |
6G120/6G70 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-WL24/60 |
1.3 |
300 |
6TS40 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-WL24/63 |
1.39 |
180 |
5TS32 |
Internal spline / flange |
Pneumatic / manual |
|
10 |
SDQ-WL 24/63-B |
1.39 |
180 |
5G32A |
Internal spline / flange |
Pneumatic / manual |
|
11 |
SDQ-WL 24/66 |
1.359 |
180 |
5TS32-C |
Internal spline / flange |
Pneumatic / manual |
|
12 |
SDQ-WL 24/66-B |
1.146 |
180 |
5G32B/5G32C |
Internal spline / flange |
Pneumatic / manual |
|
13 |
SDQ-WL 24/67 SDQ-WL 25/67 |
1.147 |
300 |
6T120/6S46/6S51 |
Internal spline / flange |
Pneumatics |
|
14 |
SDQ-WL 24/70 |
1.15 |
200 |
6S46B (2015-4-25) |
Internal spline / flange |
Pneumatic / manual |
|
15 |
SDQ-WL 24/71 SDQ-WL 25/71 |
1.11 |
300 |
6S51B/6S46B |
Internal spline / flange |
Pneumatic / manual |
|
16 |
SDQ-WL 24/72 |
1.133 |
300 |
6TS55E/6TS60 |
Internal spline / flange |
Pneumatic / manual |
|
17 |
SDQ-WL23/63 |
1.35 |
350 |
10H46 |
Internal spline / flange |
Pneumatics |
|
18 |
SDQ-WL23/71 |
1.15 |
400 |
7TS60 |
Internal spline / flange |
Pneumatics |
|
19 |
SDQ-WL24/75 |
1 |
400 |
7TS60B |
Internal spline / flange |
Pneumatics |
|
20 |
SDQ-WL25/70 |
1.244 |
400 |
7TS60C |
Internal flange / spline |
Pneumatics |
|
21 |
SDQ-WL24/73 |
1.07 |
400 |
7TS60D |
Internal spline / flange |
Pneumatics |
|
22 |
SDQ-WL25/33 |
1.228 |
350 |
10h46 (right) |
Internal spline / flange |
Pneumatics |
|
23 |
SDQ-WL27/70 |
1.08 |
150 |
5TS40 |
Internal spline / flange |
Pneumatics |
|
24 |
SDQ-WL31/46 |
1.2 |
180 |
5TS40 |
Internal spline / flange |
Pneumatics |
|
25 |
SDQ-WL211/100 |
1 |
1000 |
9G90 |
Internal spline / flange |
Pneumatics |
SINOTRUCK CZPT PTO power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-ZD27/61 |
1.1 |
600 |
DC7J120T |
Flange flange |
Pneumatic (dynamic clutch) |
|
2 |
HW50 |
0.739 |
500 |
HW14710/HW18710 HW15710/HW19710 |
Internal flange / spline |
Pneumatics |
|
3 |
HW70 |
0.793 |
700 |
HW18709/HW18710 |
Internal spline / flange |
|
|
4 |
HW80Q-F301 |
800 |
HW9571C1 |
Flange flange |
Pneumatics |
|
|
5 |
HW140Q-F301 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
6 |
HW140Q-F302 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
7 |
HW140Q-F303 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
8 |
HW140Q-F305 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
9 |
HW60Q-F300 |
0.686 |
600 |
HW12706 |
Flange flange |
Pneumatics |
Other series of power take-off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-HL211/65 |
0.772 |
650 |
Soda gearbox 12sob1500 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-HL211/100 |
1 |
1000 |
Soda gearbox 12sob1500 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-NQ42/26 |
1.15 |
150 |
NAC 2830.5 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-NQ42/27 |
1.15 |
150 |
NAC 2830.5 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-SQ42/77 |
1.13 |
300 |
SAIC sc50m6d |
Internal spline / flange |
Pneumatics |
New energy Electric Power Truck series power take off PTO
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-LK31/38 |
1.043 |
300 |
HangZhou green control 6s100 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-LK24/36 |
1.136 |
300 |
HangZhou green control j6s95 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-LK20/56 |
1.148 |
300 |
HangZhou green control j2s130 |
Internal spline / flange |
Pneumatics |
Export series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
Pto1000 series |
0.6- 1.88 |
300 |
EATON FS 3005/4005 EATON 6305 |
Internal flange / spline |
Pneumatics |
|
2 |
Pto2000 series |
0.6- 1.88 |
350 |
Eaton fuller CZPT rt-11109a / rt-6609a rt-7608a Allison Ellison M-5600/M-6600/S-5600 S-6600 |
Internal spline / flange |
Pneumatics |
|
3 |
3131(BZ) |
0.84-2.9 4 |
450 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
4 |
3252(BZ) |
0.81-1.8 5 |
300 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
5 |
3151(BZ) |
0.84-2 |
540 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Constant mesh |
|
6 |
3300 |
0.74-1 |
390 |
Allison Ellison MD-1000/MD-2000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
7 |
PTO852 |
1.13 |
650 |
Allison |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
8 |
103K_03(BZ) |
0.77-0.55 |
650 |
ZF ZF S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
|
9 |
1571K_03 (BZ) |
0.76 |
420 |
ZF ZF S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
Gearbox manufacturer code (see Table 1 for details)
|
Gearbox manufacturer code |
|||
|
Code |
Explain |
Code |
explain |
|
WS |
ZheJiang CZPT gearbox Co., Ltd |
ZD |
Sinotruk HangZhou gearbox Co., Ltd |
|
ZF |
HangZhou ZF CZPT gearbox Co., Ltd |
FS |
ZheJiang Fashite automobile transmission Co., Ltd |
|
AS |
Allison transmission Co., Ltd |
SQ |
ZheJiang Automotive Transmission Co., Ltd |
|
ET |
Eaton (ZheJiang ) gearbox Co., Ltd |
NQ |
HangZhou Automobile Gearbox Co., Ltd |
|
DF |
Xihu (West Lake) Dis.feng (HangZhou) gearbox Co., Ltd |
LK |
HangZhou lvkong transmission Co., Ltd |
|
YQ |
Gearbox branch of CZPT Xihu (West Lake) Dis. transmission division |
HL |
ZheZheJiang oda transmission Co., Ltd |
|
HY |
HangZhou CZPT automobile transmission Co., Ltd |
GT |
Getrac (ZheJiang ) transmission system Co., Ltd |
|
WL |
ZHangZhoug WanLiYang Co., Ltd |
XR |
ZheZheJiang ngrui gear transmission Co., Ltd |
|
ZZ |
Sinotruk Xihu (West Lake) Dis. gearbox Co., Ltd |
HD |
ZHangZhoug Xihu (West Lake) Dis.feng Gear Co., Ltd |
|
HC |
HangZhou Xihu (West Lake) Dis. gearbox Group Co., Ltd |
QJ |
Xihu (West Lake) Dis. Gear Transmission Co., Ltd |
|
LG |
Fudong CZPT automobile bridge box Co., Ltd |
ZM |
ZHangZhoug Zhongma automobile transmission Co., Ltd |
|
ZC |
HangZhou Gear Co., Ltd |
LQ |
HangZhou Qingfu transmission Co., Ltd |
|
CQ |
ZheJiang Qingfu transmission Co., Ltd |
SR |
Shengrui transmission Co., Ltd |
|
JF |
Jiefu Transmission Technology Co., Ltd |
||
Certifications
Packaging & Shipping
FAQ
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.
2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.
3. What’s the delivery time and can you lower the price?
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
4.Can you supply some quick-wear parts?
Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
6.Do you have any used products for sale?
We have products in stock for choices,the prices are favorable,we’ll show you our stock products if you need.
7.What’s the payment terms?
TT 30% as deposit, balance before shipment by TT or at sight.
8. How to guarantee customers get the goods smoothly after they payment?
Don’t worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don’t delivery products, the deposit will be returned to you.
9.How can you ensure the quality of the products?
Don’t worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.
There are 5 commonly used wrecker tow truck , usually depending on the type or size of the recovery wrecker :
First type : Boom towing truck
– use adjustable arms and winches to retract vehicles from ditches, embankments, or any vehicle that cannot arrive safely. Some booms are fixed, some heavy rotating racks, hydraulic telescopic tubes, others. In the past boom, trucks used the “hook chain” system, the chain around the frame or axle, and then hoisted by the winch. A heavy rubber pad is attached to the truck and truck so that it can be towed CZPT other bridges.” Slings and belts are an evolution, replacing parts of chains with rubber belts. slings did not use too much today because they could shave bumper cars. But they are sometimes used in wrecker accidents carrier or have 1 or 2 front wheels or rear wheels missing or pickups and other vehicles have steel bumpers. Equipped with all wheel drive, the truck is towed away, unable to use the machine string, because it can make the car power transmission system problems.
Second type :Wheel lift wrecker towing truck
(also called “glasses”) – from the chain hook technique to generate a large metal frame, can be installed in the front or rear under the cradle, rendering vehicles by pneumatic or hydraulic hoist can drag the ground clear front or rear. The device usually picks up the wheel of the vehicle (i.e., front wheel, if it is front wheel drive, rear wheel, if it is rear wheel drive), and contacts the tire. wheel lift wrecker tow truck are common in china; cradles are like glasses. Medium and heavy-duty trucks use variations, “underlift” or “chassis lift”, in which the elevator shaft or frame is not the wheel. A forklift truck can be used as an adapter or a lift chassis.
Third type :Integration towing truck (also known as “Self Loader wrecker equipment“, “Snatcher towing vehicle“, “quick choice tow truck” or “roll back wrecker“) – the arm and wheel lift together. Used of light trucks to recover or stop vehicles. Most of the truck’s cab equipment is controlled so that the pickup truck does not leave the truck to connect the vehicle. heavy trucks are also manufactured using integrated lifts.
Forth type –Flat plates wrecker truck (also known as “rolling back tow truck” or “sliding tow truck“) – the entire back of the truck is fitted with a bed that can be hydraulically tilted down to the ground, allowing the vehicle to be placed under its own power or pulled up by the winch. [9] because they carry, rather than traction vehicles, it can be completely fixed; in the United States, they carry serious damage to car accidents.
Fifth type —Lifting platform wrecker truck the derricks lift the vehicle vertically and use the wheel lift to load it on the bed. In Europe, this car can eliminate the parallel parking of vehicles.
| Application: | Motor, Machinery, Agricultural Machinery, Car, Hydraulic Gear Pump Crane ( Oil Pump, Fuel Pump |
|---|---|
| Function: | Distribution Power |
| Gearbox 1: | 17kt6K-00030, 17g0a7-15(Jiangshan), 17jk35-00030 |
| Pto: | Sdq24/69 Sdq24/71, Sdq24/70, Sdq24/69-1 |
| Transmission 1: | 17g1a7-15, 17jk07-00030-E, 17FT67-00030, 17D100-00 |
| Transmission 2: | 646b, Mly6s51b-20b-00, Wly6ts55b-63-32, Wly6s51b-2 |
| Samples: |
US$ 580/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right PTO for Your Machine
There are many types of PTOs, and you may be wondering which one is the best choice for your machine. In this article, you’ll learn about Splined PTOs, Reverse PTOs, and Independent PTOs. Choosing the right PTO for your needs will allow you to operate your machine more efficiently.
LPTO
LPTOs can be dangerous for operators. They should stay at a safe distance from them to avoid getting entangled in the rotating shaft. If an operator gets caught, he or she could sustain severe injuries or even death. Safety precautions include wearing clothing that does not cling to the shaft.
There are many types of PTOs. Some of them support high power applications. These models have different shafts with varying spline configurations. Type 3 shafts have 20 splines, while Type 2 shafts have just 10. Type 3 and Type 2 shafts are referred to as large 1000 and small 1000 respectively by farmers.
The power that drives the PTO shaft comes from the gearbox through the countershaft. Standardizing the PTO speed helps to design equipment around the given speed. For example, a threshing machine is supposed to run at a specific peripheral velocity of the threshing cylinder, so pulley arrangements are usually designed with that speed in mind.
Because the PTO shaft is often low to the ground, it is easier to handle it from a kneeling position. Using a good surface to place the implement on will help you align the splines properly. To make this process easier, use a floor mat, a carpet, or a sturdy piece of cardboard. Once you have positioned the shaft on the PTO, press the locking pin button. If the PTO shaft is stuck, jiggling the implement a bit will help it slide into position.
Reverse PTO
There are several different ways to reverse the PTO shaft. Some older Massey Ferguson style tractors are designed to reverse the PTO shaft by turning it backward. This feature is useful for raising upright silo unloaders. The first method involves driving backward with the rear wheel jacked up and rotating while the rear wheel spins. This method is also useful for reversing a baler or unplugging a baler.
Another option is to install a reverse PTO adapter. These adapters are available for all types of PTOs. A reverse PTO is an excellent choice for any implement that can get stuck when rotating in one direction. However, it should only be used when it is absolutely necessary. The reverse PTO should not be rotated too far backward or for too long.
There are also different types of PTO shafts. Some transfer energy faster than others. That is why a large tractor’s PTO will transfer energy faster than a small tractor’s. Furthermore, independent PTOs don’t require a parking break like transmission PTOs do. There is also a difference between metric and domestic PTO shafts.
In farming, the reverse PTO is used when the farm machinery gets stuck or needs to be reversed. It also makes it possible to use the tractor to turn in the opposite direction. A PTO is a mechanical gearbox that transfers energy from the tractor’s engine to other implements. It can also supply power in the form of rotating pumps.
Splined PTO
The splined PTO shaft consists of six equal-sized splines that are spaced apart by grooves. The splines are angled to the axis of rotation of the PTO shaft. When the splines and the grooves meet, they align the screw end portion.
A splined PTO shaft can be retrofitted to most size 6 PTO shafts. It can also be used as a replacement for a worn out or damaged PTO shaft. This type of PTO shaft is recommended for tractors that require a quick and easy install.
Splined PTO shafts can be used for different types of agricultural equipment. They are compatible with standard and Weasler yokes. They can be cut to size and are available in North American and Metric series. They also come in an Italian Metric series. These shafts are easy to install and remove with a simple key.
A splined PTO shaft is essential for facilitating the interconnection of different components. A power take off (PTO) shaft tool engages the splined PTO shaft and turns it in order to align it with the input shaft of a cooperating structure. This tool is used to connect the PTO shaft to a tractor. This can also be used on a truck, trailer, or any other powered vehicle.
A wrench 40 is also useful for securing a PTO shaft. It enables the wrench to rotate the P.T.O. shaft approximately 30 degrees. The wrench’s leg 46 engages the shaft on the opposite side of the PTO shaft 16. Once the wrench is tightened, the tool can rotate the PTO shaft to make it align with the input shaft 16.
Independent PTO
Independent PTO shafts can be mechanical or hydraulic. The mechanical type has a separate on/off selector and control lever, whereas hydraulic PTOs have just one. The mechanical version is preferred for tractors that need to operate at lower speeds and for applications such as baling and tilling. The hydraulic version reduces noise and vibration.
Another advantage of an independent PTO is that it is easy to engage. Instead of engaging a clutch, you simply shift the PTO selector lever away from ‘OFF’ and flip the PTO switch to “ON.” This lever is usually located on the right hand side of the operator’s seat.
The ISO 500 standard provides specifications for independent PTO shafts. This specification lays out the size of the shaft, number of splines and the location of the PTO. In addition, it specifies the maximum RPM and shaft diameter for a PTO. The original ISO 500-3 specification calls for 540 revolutions per minute for shafts with six splines.
Another benefit of an independent PTO is its ability to be engaged or disengaged without using the transmission clutch. The lever can be pressed halfway or fully to engage an independent PTO. The independent PTO also allows you to stop the tractor while it is in motion. Independent PTOs are available in hydrostatic or mechanical configurations, and are particularly popular with hydrostatic drives.
LPTO shaft guard
An LPTO shaft guard prevents accidental rotational collisions by covering the shaft of a PTO. A PTO shaft is a moving part that can entrap a person’s legs, arms, and clothing. In a pinch, a person could become entangled in the shaft and suffer a serious injury. A PTO shaft guard is a great way to protect yourself against these dangerous incidents.
PTO mishaps can cause severe injuries and even fatalities. To prevent this, equipment manufacturers have made strides in improving the design and construction of their PTO drive shafts. A PTO shaft guard will protect the drive shaft from entanglement and tearing. Proper installation and maintenance of a PTO shaft guard can help protect the tractor, PTO, and other machinery.
Tractor PTO shaft guards are made from durable plastics and can be installed easily. They keep all the parts of the tractor in place and prevent accidents during operation. These parts are vital components for many farm equipments. A 540 RPM shaft can pull a person from a distance of five feet. A PTO shaft guard will prevent this from happening by keeping clothing from becoming entangled in the shaft.
Another important component of a PTO system is the master shield, which covers the PTO stub and the input driveline shaft of an implement. The master shield protects both the tractor PTO stub and the connection end of the input driveline shaft. It extends over the PTO stub on three sides. Many people never replace their master shields because they are too expensive.
Safety of handling a pto shaft
Handling a PTO shaft safely is a vital component of tractor safety. Safety shields must be properly fastened to the shaft to prevent any accidents. The shield should also be inspected and maintained regularly. Otherwise, foreign materials, including clothing, can enter the shaft’s bearings. It is also important to walk around the rotating shaft whenever possible.
Power takeoff shafts are used to transfer mechanical power from farm tractors to implements. However, improper handling of these devices can lead to severe injuries, including amputation and multiple fractures. Spinal injuries are also common, especially if an individual is rotated around the shaft.
Operator awareness is key to avoiding PTO entanglement. Performing repairs while a machine is in operation or wearing loose, frayed clothing may lead to injury. It is also important to read the manufacturer’s instructions before operating a PTO. Lastly, it is important to never operate a PTO while the engine is running.
PTO shafts should be protected by ‘U’ or ‘O’ guards on the tractor and the attached implement. It is also important to use a PTO stand. As with any mechanical part, handling a PTO shaft requires care. Always ensure that the tractor is off before working and remove the key before working on it. Also, it is important to avoid stepping on the drive line or going under it. Make sure you wear protective clothing and shoes. Avoid wearing clothes that have laces as they could become entangled in the shaft and cause injury.
The connection to the PTO shaft should be close to the ground. If it is not, kneel on a flat surface. A piece of carpet, automobile floor-mat or cardboard can work well. Then, align the splines on the PTO shaft. To do this, press the locking pin button, then pull the ball-lock collar back, and then push the shaft onto the PTO.
editor by CX 2023-05-31