China supplier Customize Cheap High Torque Diaphragm Coupling Supplier bush hog pto shaft

Product Description

JMIJ Type Diaphragm Coupling

The JMIJ Elastic Diaphragm Coupling compensates for the 2 axis misalignment capability. Compared with the gear coupling, the angular displacement can be doubled. The radial displacement has small reaction force and large flexibility, allowing a certain axial, radial and angular displacement. The JMIJ Double Key Elastic Diaphragm Coupling are different from the common diaphragm couplings. They not only connect the intermediate shaft, extend the transmission distance, but also have 2 diaphragms to increase the flexibility compensation amount, so they are also called double diaphragm couplings.

JMIJ Double Key Elastic Diaphragm Coupling can accurately transfer speed, operation without rotation difference, and can be used for precision mechanical transmission. The transmission efficiency is up to 99.86% in the transmission, especially for medium and high speed high power transmission. It is simple in structure, light in weight, small in volume and convenient in assembly and dismantling. Do not have to move the machine to install, without lubrication. It can move safely under the condition of shock and vibration. It has obvious shock absorption, no noise, no wear and tear.

JMIJ Type Diaphragm Coupling Main Dimension(JB/T9147-1999)

Type Nominal  torque
Tn
Peak torque
Tmax
Max
Speed
np
Bore diameter
d
Bore Length D t L2
min
Mass Rotary inertia
Y type J,J1,Z,Z1 type L(recommend)
L L L1
N·m N·m r·min-1 mm kg kg·m2
JMIJ1 25 80 6000 14 32 J127
Z120
35 90 8.8 100 1.8 0.0013
16,18,19 42 30
20,22 52 38
JMIJ2 63 180 5000 18,19 42 30 45 100 9.5 2.4 0.002
20,22,24 52 38
25 62 44
JMIJ3 100 315 5000 20,22,24 52 38 50 120 11 120 4.1 0.0047
25,28 62 44
30 82 60
JMIJ4 160 500 4500 24 52 38 55 130 12.5 5.4 0.0069
25,28 62 44
30,32,35 82 60
JMIJ5 250 710 4000 28 62 44 60 150 14 140 8.8 0.5711
30,32,35,38 82 60
40 112 84
JMIJ6 400 1120 3600 32,35,38 82 82 60 65 170 15.5 13.4 0.5711
40,42,45,48,
50
112 112 84
JMIJ7 630 1800 3000 40,42,45,48,
50,55,56
112 112 84 70 210 19 150 22.3 0..76
60 142 107
JMIJ8 1000 2500 2800 45,48,50,55,
56
112 112 84 80 240 22.5 180 36 0.1602
60,63,65,70 142 107
JMIJ9 1600 4000 2500 55,56 112 84 85 260 24 220 48 0.2509
60,63,70,71,
75
142 107
80 172 132
JMIJ10 2500 6300 2000 63,65,70,71,75 142 142 107 90 280 17 250 85 0.5159
80,85,90,95 172 132
JMIJ11 4000 9000 1800 75 142 142 107 95 300 19.5 290 112 0.8223
80,85,90,95 172 172 132
100,110 212 167
JMIJ12 6300 12500 1600 90,95 172 132 120 340 23 300 152 1.4109
100,110,120,125 212 167

Product Display

 

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Our Company

HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.

Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

Contact Us
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
 

Standard Or Nonstandard: Standard
Shaft Hole: 10-32
Torque: >80N.M
Bore Diameter: 19mm
Speed: 10000r/M
Structure: Flexible
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Shaft Collar

Choosing the Right PTO Shaft For Your Tractor

There are a number of different PTO shaft types available for your tractor. These include the North American, German and Italian styles. They are also available in various series, each with different options for bearing diameter and cap-to-cap overall length. To choose the best shaft for your tractor, it’s important to know what kind of tractor you own and the type of PTO that you need.

IID shaft

When it comes to choosing the best IID shaft for your PTO, the selection process can be a challenge. Whether you are replacing the shaft in your own tractor or need to purchase one for a client, there are several factors to consider. The right PTO shaft for your tractor should be compatible with the equipment you currently use. For instance, a shaft that can be used in a farm tractor will fit a different farm tractor than one used in a construction machine.
First of all, a safety shield is a critical part of your IID shaft. The shielding will help keep the entire shaft free of any potential hazards. Typically, shielding will cover the straight part of the shaft, universal joints, and PTO connection. A shield can also help protect you from injury if you accidentally run into the shaft or touch the guard.
A power take off shaft will be the best choice if you are using a tractor for other applications, such as mowing, shredding, or plowing. A PTO shaft is also a crucial part if you own a large tractor or implement. It will allow you to operate your equipment with maximum efficiency.
An IID shaft is designed to slide into another piece when the tractor’s PTO is engaged. A disconnected IID shaft can pull the two pieces apart and cause the tractor to swing uncontrollably when it is engaged. This can cause serious injuries or even death. You should not engage a PTO if you aren’t certain of its strength.
To ensure the safety of the driveline shield, check for proper alignment of the PTO shaft. If it isn’t aligned properly, foreign materials can enter the shaft bearings. A damaged driveline shield can also lead to driveline separation, particularly when the tractor is making sharp turns or downhills. In addition, improper alignment of the drawbar may damage the protective shield that protects the shaft.
Choosing the right PTO series size requires proper measuring of each part. Measure the length of each yoke outside the PTO shaft and determine the appropriate PTO series size. The PTO yoke size chart can be helpful when choosing the correct size for your tractor.

Reverse PTO

Many different applications call for a reverse PTO shaft. These adapters allow the PTO shaft to be turned in the opposite direction of the engine, matching the rotation of the power take-off to the rotation of the equipment it drives. They can be used to space the power take-off away from the transmission case and improve clearance for a direct-coupled pump or driveshaft.
Reverse PTO shafts are available for CZPT . They are designed for six-spline 540-rpm applications. They also offer the option of multi-speed operation. Reversed PTOs are a great option for implements that can get stuck.
Reverse PTOs can be used on most types of PTO. The reverse version has a gearbox that allows it to rotate backward. These are ideal for implements that can get stuck in a field. A reverse PTO shaft makes it possible to work with the implement without having to wait for it to get unstuck.
When using a PTO, it’s important to know which type of gearbox is needed. If you have an older model, you’ll probably need a reverse PTO shaft. These are generally used on older, vintage tractors with ground drive PTO. The ground speed pTO shafts match the speed of the tractor’s final drive, so when the tractor is in reverse, the gearbox will turn backward. This feature will not function if you’re working stationary, though.
A tractor with a reverse PTO is important for a number of reasons. For example, the reverse PTO can help you turn a stuck tractor in the opposite direction, which is useful when a piece of farm equipment becomes stuck in mud or when you need to push a stuck implement back. In addition, it allows you to use the tractor’s power to operate various implements. The reverse PTO also helps you know how much power is needed to run various implements on various terrain.
In addition to being convenient, reverse PTO shafts also help reduce the risk of damage to implements attached to the PTO. It’s vital to keep a PTO shaft in good working order.
Shaft Collar

Square rigid shaft

When you are looking for a new square rigid PTO shaft, you should consider a few factors. Choosing the right one can be a challenge, as the process is not always simple. For instance, there are a lot of choices when it comes to different brands and interpretations. You can even choose to purchase a square rigid shaft that is not square.
Torsional rigidity is a measure of the ability of a shaft to resist torsional forces. The higher the value of J, the more rigid the shaft will be. For example, a steel shaft has a higher torsional rigidity than an HDPE shaft. The correct value of J can have a big impact on the design decisions.
Another factor to consider is the type of shaft coupling. Rigid shaft couplings are best for shafts that are perfectly aligned. While flexible couplings are flexible enough to accommodate small misalignments, they are not as flexible as the flexible ones. Rigid shaft couplings, which are typically made of metal, are not designed for high-speed rotation.
Rigid couplings are a good choice for a wide range of applications. Rigid couplings are available in many sizes and configurations, and can be used with either a powered or an unsupported shaft. Rigid couplings are also available with keyways to transmit torque.
Torsional rigidity depends on the geometry of the components. A higher torsional rigidity means a shaft is more resilient to twisting. However, excessive twisting can result in unstable performance. As a result, it is important to avoid over-twisting a shaft.
Flange couplings are another option. These couplings have two flanges that are attached to each other with bolts or nuts. They are very similar to split muff couplings and sleeve couplings. The difference is that flange couplings have two flanges – one for the shaft and one for the coupling hub.
If you are thinking about purchasing a square rigid PTO shaft for your tractor, be sure to consider the features that will best serve your specific needs. While you may be considering the price of this new shaft, remember that it is a machine part that could be dangerous.
Shaft Collar

Economy PTO

There are several standard types of PTO shafts. They can vary in diameter and number of splines, and are designed to work with a specific speed range. The following are the main differences between these types. Choosing the right type for your application will depend on its application. One of the most important considerations to make when choosing a PTO shaft is the ratio between the shaft’s diameter and the toothed wheels that are attached to it.
When choosing a PTO shaft, consider the amount of torque you need. In general, an economy PTO shaft should be able to support a maximum load of 540 Nm. In addition, it should be able to handle a high-speed output. An economy PTO shaft may need less torque than a high-performance model.
Economy PTO shafts come in two basic styles: North American and Italian. These two types are designed to provide constant-speed output and balance the power input of a tractor. There are also various other styles of PTO shafts available, including square and rectangular half-shaft assemblies. You can also purchase extra parts to repair a worn PTO shaft.
The control/monitoring unit in a PTO includes a screen display and a manual control for selecting engaged or disengaged PTO states. In addition, there is a switch in the cab mounted control unit 14 that selects normal and economy modes when driving the PTO. These modes utilize different gears to achieve the desired PTO shaft revs.
To select the right PTO speed, select the lever in economy mode and increase the throttle to the appropriate rpm. The PTO speed should be 540 RPM. The control/monitoring unit 14 will use this information to adjust the clutch control parameters. In addition to the PTO speed, it will also display the torque on the PTO shaft.
Economy PTO shafts are ideal for a variety of applications. These PTOs allow the tractor to run at lower rpms, thereby reducing noise and vibrations. They are typically available in both hydraulic and mechanical types.
China supplier Customize Cheap High Torque Diaphragm Coupling Supplier   bush hog pto shaftChina supplier Customize Cheap High Torque Diaphragm Coupling Supplier   bush hog pto shaft
editor by CX 2023-06-08