China wholesaler Driveline Adapter Cardan Shaft for Farm Equipment Pto Shaft and Tractor Pto Drive Shaft

Product Description

 

Product Description

Driveline Adapter Cardan Shaft for Farm Equipment Pto Shaft and Tractor Pto Drive Shaft

A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer. 

Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.

Product Specifications

 

In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CHINAMFG the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.

 

Packaging & Shipping

 

 

 

Company Profile

HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like  Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.

FAQ

1.WHAT’S THE PAYMENT TERM?

When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.  

2.HOW TO DELIVER THE GOODS TO US?

Usually we will ship the goods to you by sea.

3.How long is your delivery time and shipment?

30-45days

 

Type: Pto Shaft
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor
Material: 45cr Steel
Power Source: Pto Dirven Shaft
Weight: 8-15kg
After-sales Service: Online Support
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pto shaft

Can tractor PTO shafts be customized for specific implement or machinery requirements?

Yes, tractor power take-off (PTO) shafts can be customized to meet specific implement or machinery requirements. Customization allows for the optimal integration of PTO shafts with different agricultural implements and machinery. Here’s a detailed explanation:

1. Length and Size: PTO shafts can be customized in terms of length and size to suit specific requirements. Different implements or machinery may have varying distance requirements between the tractor’s PTO output and the input shaft of the implement. Customizing the length ensures proper alignment and a secure connection. Additionally, the size of the PTO shaft, such as the diameter, can be adjusted to match the power and torque requirements of the implement.

2. Attachment Methods: PTO shafts can be customized to accommodate different attachment methods required by specific implements. The attachment method refers to how the PTO shaft connects to the implement’s input shaft. Common attachment methods include a shear pin, a quick-release collar, or a splined connection. Customization allows manufacturers to provide the appropriate attachment method based on the implement’s design and requirements.

3. Shaft Configurations: PTO shafts can have different configurations to suit specific implement or machinery designs. For example, some implements may require a straight shaft, while others may need a telescopic or sliding shaft to accommodate variable distance requirements during operation. Customizing the shaft configuration ensures a proper fit and allows for smooth operation without compromising safety.

4. Protection and Shielding: Customization of PTO shafts can include additional protection and shielding features. Agricultural tasks often involve debris and potential hazards that can damage the PTO shaft. Manufacturers can customize the shaft by adding protective guards, such as metal or polymer shields, to prevent entanglement or contact with external objects. This customization enhances safety and prolongs the lifespan of the PTO shaft.

5. Specific Industry Standards: Some industries or applications may have specific standards or regulations for PTO shafts. Manufacturers can customize PTO shafts to meet these specific industry requirements, ensuring compliance with safety standards and compatibility with machinery used in those industries.

It’s important to note that the customization of PTO shafts is typically carried out by the manufacturers or specialized suppliers. They have the expertise and knowledge to design and manufacture customized PTO shafts that meet the required specifications and standards.

In summary, tractor PTO shafts can be customized to accommodate specific implement or machinery requirements. Customization options include adjusting the length and size, adapting attachment methods, configuring the shaft design, adding protection and shielding, and meeting specific industry standards. Customized PTO shafts ensure optimal integration and performance, enhancing the overall efficiency and safety of agricultural operations.

pto shaft

What factors should be considered when selecting the right tractor PTO shaft for an implement?

When selecting the right tractor PTO shaft for an implement, several factors should be taken into consideration to ensure compatibility and optimal performance. Here are the key factors to consider:

  1. PTO Shaft Type: Determine the type of PTO shaft required for the implement. There are different types of PTO shafts, such as standard, wide-angle, or constant velocity (CV) shafts. The type of implement and its power requirements will dictate the appropriate PTO shaft type.
  2. PTO Shaft Size: Consider the size of the PTO shaft, including its diameter and length. The PTO shaft’s size should match the specifications of both the tractor’s PTO output shaft and the implement’s input shaft. Ensure that the PTO shaft size is compatible to achieve a proper fit and engagement.
  3. Power Rating: Evaluate the power requirements of the implement. The tractor’s PTO shaft must have a power rating that matches or exceeds the power output of the tractor’s engine and the power demand of the implement. Choosing a PTO shaft with an inadequate power rating can lead to inefficiencies, premature wear, or even damage to the equipment.
  4. Rotational Speed: Consider the required rotational speed of the implement. The PTO shaft’s rotational speed should match the speed required by the implement for optimal performance. Ensure that the PTO shaft’s rotational speed matches the implement’s input speed specifications.
  5. Alignment and Length: Assess the alignment and length requirements between the tractor and the implement. The PTO shaft should be of appropriate length to allow for proper alignment and engagement between the tractor’s PTO output shaft and the implement’s input shaft. The PTO shaft may need to be adjustable or be available in different lengths to accommodate variations in alignment and implement size.
  6. Safety Features: Consider safety features such as shielding or guarding on the PTO shaft. These features protect operators from contact with rotating shafts and moving parts, reducing the risk of accidents or injuries. Ensure that the PTO shaft has appropriate safety measures in place.
  7. Quality and Durability: Choose a PTO shaft of high-quality construction and durability. Look for reputable manufacturers or suppliers who offer reliable and robust PTO shafts. A durable PTO shaft can withstand the demands of heavy-duty applications and provide long-lasting performance.
  8. Budget and Cost: Finally, consider the budget and cost factors. Compare the prices of different PTO shaft options while balancing the required features and quality. Select a PTO shaft that offers the best value for money and meets the necessary specifications for your specific application.

By considering these factors, you can select the right tractor PTO shaft that ensures compatibility, efficiency, and safety when connecting and operating implements with your tractor.

pto shaft

What Benefits Do Tractor PTO Shafts Offer for Various Agricultural Tasks?

Tractor power take-off (PTO) shafts offer numerous benefits for various agricultural tasks. They provide a versatile and efficient means of powering different implements used in farming operations. Here’s a detailed explanation of the benefits that tractor PTO shafts offer for various agricultural tasks:

1. Versatility:

One of the key benefits of tractor PTO shafts is their versatility. PTO shafts allow farmers to connect a wide range of implements to their tractors, including rotary mowers, tillers, balers, spreaders, and more. This versatility enables farmers to perform different tasks with a single tractor, eliminating the need for multiple specialized machines. Farmers can easily switch between implements, adapting to various agricultural activities and increasing operational efficiency.

2. Increased Efficiency:

Tractor PTO shafts significantly enhance efficiency in agricultural tasks. By utilizing a single power source (the tractor’s engine) to drive multiple implements, farmers can streamline their operations and save time. Instead of manually operating separate machines, farmers can leverage the power and speed control offered by the tractor’s PTO shaft to efficiently perform tasks such as mowing, tilling, planting, harvesting, and more. This increased efficiency allows farmers to accomplish more work in less time, leading to improved productivity.

3. Cost Savings:

The use of tractor PTO shafts can result in cost savings for farmers. By eliminating the need for dedicated engines on each implement, farmers can avoid the expense of purchasing and maintaining multiple machines. Additionally, the versatility of PTO shafts allows farmers to invest in a smaller number of implements that can be used for multiple tasks, further reducing costs. The cost savings associated with tractor PTO shafts can contribute to improved profitability and financial sustainability for farmers.

4. Flexibility:

Tractor PTO shafts offer flexibility in agricultural operations. Farmers can easily attach and detach implements as needed, depending on the specific task at hand. This flexibility allows for rapid adaptation to changing field conditions, crop types, or seasonal requirements. Farmers can quickly switch between implements, such as switching from a mower to a seeder or from a tiller to a sprayer. The ability to utilize different implements with a single tractor provides farmers with the flexibility to optimize their operations and respond to varying agricultural demands.

5. Precise Power Control:

Tractor PTO shafts provide precise power control, allowing farmers to adjust the rotational speed and torque delivered to the implement. Different agricultural tasks require specific power requirements, and the ability to adjust the PTO speed allows farmers to optimize the performance of attached implements. For instance, certain tasks may require higher rotational speed for efficient cutting or lower speed for precise soil cultivation. The ability to control power output through the PTO shaft contributes to improved accuracy and effectiveness in various agricultural operations.

6. Standardization:

Tractor PTO shafts follow standardized connection interfaces, ensuring compatibility between tractors and implements from different manufacturers. This standardization allows farmers to easily connect implements to their tractors without compatibility issues. Farmers have a wide range of implements to choose from, and the standardized PTO shaft connection ensures seamless integration and operation. Standardization simplifies equipment selection, replacement, and compatibility concerns, enhancing the convenience and effectiveness of agricultural tasks.

7. Safety Considerations:

While not a direct benefit for agricultural tasks, tractor PTO shafts incorporate safety features to protect operators and bystanders. PTO shafts are typically equipped with protective guards or shields that cover the rotating shaft, reducing the risk of accidents or entanglement. These safety features help prevent injuries and promote safe working conditions in agricultural operations.

In summary, tractor PTO shafts offer numerous benefits for various agricultural tasks. They provide versatility, increased efficiency, cost savings, flexibility, precise power control, and standardized compatibility. By leveraging the power of the tractor’s engine, PTO shafts enable farmers to efficiently power different implements, enhancing productivity and optimizing farming operations.

China wholesaler Driveline Adapter Cardan Shaft for Farm Equipment Pto Shaft and Tractor Pto Drive Shaft  China wholesaler Driveline Adapter Cardan Shaft for Farm Equipment Pto Shaft and Tractor Pto Drive Shaft
editor by CX 2023-10-17