Deskripsi Produk
Deskripsi Produk
Zhang Sheng menawarkan mesin penghancur kayu PTO eksklusif desain terbaru kami hingga ukuran 8,7 inci (22 cm) dengan pengumpanan hidrolik otomatis. Mesin penghancur kayu ini dirancang untuk memberikan solusi ekonomis dan berkualitas bagi pemilik lahan. Ini adalah mesin penghancur kayu yang sangat bertenaga dan bertujuan menjadi mesin penghancur kayu dengan nilai terbaik di kelasnya.
Keunggulan Produk
Sistem pengumpanan hidrolik
Roller penekan pengumpan digerakkan oleh motor hidrolik canggih. Arah dan kecepatannya dapat disesuaikan untuk menangani cabang dengan berbagai bentuk dan ukuran dengan mudah.
Rotor yang andal
Rotor diproses menggunakan mesin bubut CNC dan menjalani pemeriksaan keseimbangan dinamis yang ketat untuk memastikan kinerja yang stabil. Kipas besar di bagian belakang dengan kecepatan lebih dari 540 RPM, yang dapat membuang serpihan kayu dengan lancar.
Pisau
Mesin penghancur kayu ini menggunakan 4 bilah baja mangan berkekuatan tinggi, dengan jarak 90° satu sama lain. Bilah dapat diganti dengan sangat cepat berkat desain rumah rotor berbentuk cangkang.
Masuk
Dengan lubang masuk yang besar, alat ini dapat dengan mudah memproses banyak cabang, mengurangi pekerjaan pemangkasan manual.
Saluran pembuangan
Saluran pembuangan dirancang untuk berputar 360°, yang membuatnya lebih fleksibel terlepas dari arah pembuangan mesin penghancur kayu. Dilengkapi dengan deflektor putar di ujung saluran pembuangan, alat ini dapat mengontrol posisi tempat serpihan kayu dikeluarkan.
Termasuk poros PTO dengan pin pengaman.
Parameter Produk
|
Model |
ZSPS42S |
ZSPS42R |
ZSPS62R |
ZSPS92R |
|
Diameter roda gila |
630 mm |
630 mm |
740 mm |
940 mm |
|
Ketebalan roda gila |
18 mm |
18 mm |
25 mm |
35 mm |
|
Berat roda gila |
50 kg |
50 kg |
80 kg |
170 kg |
|
JUMLAH mata pisau |
4 |
4 |
4 |
4 |
|
bahan pisau |
65 menit |
65 menit |
65 menit |
Cr12 |
|
ukuran mata pisau |
210*60*9mm |
210*60*9mm |
240*60*10mm |
320*100*16mm |
|
ukuran corong pengumpan |
500*500mm |
500*500mm |
580*580mm |
620*620mm |
|
ukuran keluar |
100 mm |
100 mm |
150 mm |
220 mm |
|
ukuran kemasan |
1140*910*1260 |
1140*910*1260 |
1200*1100*2100 |
1300*1150*2150 |
|
berat paket |
225 kg |
340 kg |
538 kg |
655 kg |
|
daya yang dibutuhkan |
35-60 |
35-60 |
60-80 |
75-100 |
Pengemasan & Pengiriman
Dikemas dalam rangka logam berkualitas tinggi, dengan papan di bagian bawah untuk penyangga dan lapisan plastik tambahan untuk perlindungan. Pastikan mesin dikirim kepada Anda dalam keadaan utuh dan tanpa kerusakan, dan mulailah produksi segera.
Contoh kasus
Produk kami diekspor ke Eropa dan negara-negara lain, dan telah mendapatkan pujian dari banyak distributor dan pengguna.
Profil Perusahaan
Didirikan pada tahun 2005, Perusahaan Peralatan Perlindungan Lingkungan Zhejiang Zhangsheng berkantor pusat di Kota Hangzhou, Provinsi Zhejiang. Perusahaan ini termasuk dalam daftar "Perusahaan Jujur di Provinsi Zhejiang", dan telah memperoleh sertifikasi ISO dan CE. Produk-produknya telah diekspor secara luas ke lebih dari 60 negara dan mendapat banyak pujian dari pelanggan. Produk utama kami meliputi mesin penghancur serpihan kayu, penghancur kayu, penggiling horizontal, penggiling tabung, mesin penghancur serpihan kayu, mesin serut kayu, mesin pembuat tepung kayu, mesin pengupas kayu, lini pelet kayu, trailer kayu gelondong dengan penjepit, pembelah kayu gelondong, mesin gergaji pita, dll.
3 set mesin pemotong laser daya tinggi dapat memenuhi pekerjaan persiapan material sebanyak 1.000 set per bulan.
5 mesin bubut CNC impor, dengan kecepatan pemrosesan yang cepat dan presisi benda kerja yang tinggi.
Lima mesin penyeimbang dinamis memastikan bahwa rotor setiap penghancur dikalibrasi secara akurat.
Memiliki bengkel perakitan seluas 5.000 meter persegi CZPT yang mampu memenuhi target produksi bulanan sebanyak 1.000 unit.
|
Biaya Pengiriman:
Perkiraan biaya pengiriman per unit. |
Akan dinegosiasikan |
|---|
| Layanan Purna Jual: | Dukungan Teknis Online |
|---|---|
| Jaminan: | 1 Tahun |
| Jenis: | Mesin Penghancur Kayu |
| Contoh: |
US$ 2600/Buah
1 Buah (Minimum Pemesanan) | Pesan Sampel |
|---|
| Kustomisasi: |
Tersedia
| Permintaan Khusus |
|---|
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Rantai pengaman
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Tameng
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by CX 2023-04-27
