Description du produit
Cheap four-wheel tractor parts yoke shaft for Agriculture Tractors
1. Tubes ou tuyaux
Nous proposons déjà des tubes à profil triangulaire et des tubes à profil citron pour toutes les séries que nous fournissons.
Nous proposons également des tubes profilés, cannelés et autres tubes à profil étoile, selon les besoins de nos clients (pour certaines séries). (Veuillez noter que notre catalogue ne présente pas l'intégralité de notre production.)
Si vous souhaitez des tubes autres que triangulaires ou en forme de citron, veuillez fournir des dessins ou des images.
2. Jougs d'extrémité
Nous proposons plusieurs types de brides à dégagement rapide et de brides à alésage lisse. Je vous suggère le modèle le plus courant à titre indicatif.
Vous pouvez également nous envoyer des dessins ou des photos si vous ne trouvez pas votre article dans notre catalogue.
3. Dispositifs de sécurité ou embrayages
Je joins à ce document les détails des dispositifs de sécurité pour votre information. Nous disposons déjà d'une roue libre (RA), d'un limiteur de couple à cliquet (SA), d'un limiteur de couple à boulon de cisaillement (SB), de 3 types de limiteurs de couple à friction (FF, FFS, FCS) et de coupleurs (adaptateurs) à roue libre (FAS).
4. Pour toute autre exigence particulière concernant la protection en plastique, le mode de connexion, la couleur de la peinture, l'emballage, etc., n'hésitez pas à me le faire savoir.
Caractéristiques:
1. Nous sommes spécialisés depuis des années dans la conception et la fabrication d'arbres de transmission, d'arbres d'accouplement de direction et de joints universels, que nous exportons vers les États-Unis, l'Europe, l'Australie, etc.
2. Application à toutes sortes de situations mécaniques générales
3. Nos produits sont d'une grande résistance et d'une grande rigidité.
4. Résistant à la chaleur et aux acides
5. Les commandes OEM sont les bienvenues
Notre usine est un fabricant leader de brides d'arbre de prise de force et de joints universels.
Nous fabriquons des étriers de prise de force de haute qualité pour divers véhicules, engins de chantier et équipements. Tous nos produits sont équipés d'un système d'allumage rotatif.
Nous exportons actuellement nos produits dans le monde entier, notamment en Amérique du Nord, en Amérique du Sud, en Europe et en Russie. Si l'un de nos produits vous intéresse, n'hésitez pas à nous contacter. Nous espérons devenir vos fournisseurs prochainement.
type d'arbre de transmission
The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
joug tubulaire
Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
joug d'extrémité
If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.
