Descripción del Producto
PTO (Power Take Off) for DFAC (Xihu (West Lake) Dis.feng Truck ) Duolika SDQ25-67LGQ1 For Transmission Gearbox 170571-C22112 /5.5 Teeth 25
Xihu (West Lake) Dis.feng Truck Part Assembly
Gearbox PTO
POWER TAKE-OFF UNIT
Fotos detalladas
Xihu (West Lake) Dis.feng DFAC Truck Power Take off (PTO Assembly)Xihu (West Lake) Dis.feng (DFAC DFCV) Truck Toma de fuerzaImages of Xihu (West Lake) Dis.feng Truck Toma de fuerza
Images of Xihu (West Lake) Dis.feng Truck Toma de fuerza
Xihu (West Lake) Dis.feng DFAC Truck Power Take off
Power Take Off (PTO) for Porcelana trucks
DFAC Duolika PTO SDQ25-67LGQ1 For Gearboox 170571-C22112/5.5 Teeth numbers 25
Images of Dfac Duolika Toma de fuerza Para Gearboox 170571-c22112
Descripción del Producto
FAW Truck power take off (FAW)
Jac Truck Xingrui series power take off (JAC)
WanLiYang series power take off (WLY)
ISUZU Truck power take off (ISUZU PTO)
SINOTRUCK CZPT PTO power take off
JMC Truck power take off (JMC PTO)
FOTON Truck power take off (FOTON PTO)
New energy Electric series power take off
Vacuum control PTO
Pneumatic control PTO
Electric control PTO
Remote manual PTO
Fast Power Take-off ( PTO) For Hydraulic Gear Pump Crane ,( Oil Pump ,Fuel Pump Tanker Bowser Special Vehicle Gearbox PTO ) Assembly CZPT CZPT truck transmission gearbox power take off QD60 PTO
China Truck Power Take-off PTO Assembly ( Fast 8JS85E 9JS119TA RTO-11609B RT-11509F 12JS160TA 12JD160TA 12JD180TGearbox Transmission SDQ211/70 )
A detailed description of the original production and operation of the full power take-off device with sandwich type power take-off is described.
| Sandwich type Power take-off List of main technical parameters | |||||||||
| Serial number | Map number | Total speed ratio | Rated power | Maximum output torque | Output interface form | Output interface location size | Indication switchform | gas Pipe interfacesize | AdaptationTransmission Model |
| One | QJQ01-571 | 0.702 | 160kW | 6-01 connector. | |||||
| Tell: tictrucks HangZhou City ZheJiang Province China | ||||
| Gearbox Factory | Gearbox Transmission Model tictrucks |
SZ OBM Model | Brief data PTO | |
| PTO ODM MODEL | Truck brand | |||
| HaChi Gearbox | C171757121-8C CA6-75AB19 CATS6-62 CA6T-123 6T120 JS6-550 TS6-53(Direct) | -8C | SDQ12/68 | FAW |
| HangZhou | C1 | FAW | ||
| HaChi Gearbox | TZ17-449 CA6T-138(FAW Eaton) | 6-74 | SDQ15/75 | FAW |
| Xihu (West Lake) Dis.feng | 17V20 17V70–Q17421(HangZhou) JC5-20T23(HangZhou) 17G0A8-LB27 17G0A88-QB80 17G1A8-20 17G0A5-EG05-B | SDQ23/30 | Furika | |
| LG | LG520Q3 LG525Q Mengwo170571-Q17571 MW525CL 17G0AB02 WLY520 | 525 | SDQ23/32 | FOTON Furika |
| SDQ33/32 | ||||
| YY | SYC07 170571-C64-E31121 TC5-30HKA20(Tangchi) TC5-30HFE9(Tangchi) YC5-30V06 LG535QHZJB1 | 1061 | SDQ23/37 | FOTON Furika |
| WLY | WLY5TS32-73–LD4-90651 17KW1-N9-N9-Q17421 | |||
| LC JAC | 2830.5 | SDQ42/27 | IVECO NAVECO | |
| LC JAC | LC6T35 | SDQ50/35 | JAC | |
| LC JAC | LC6T46(A2Q25) LC6T450MT(AZQ28) WLYZ6S46( ) | 646 | SDQ50/45 | FOTON AUMARK |
| WLY | WLY6S46 | 646 | SDQ50/69 | |
| LC JAC | LC6T540 15CO7571 | SDQ50/63 | JAC | |
| LC JAC | LC5T97 LC5T30( 6teeth) | 5T97 | SDQ50/71 | |
| LC JAC | LC5T400M1(A2Q08) | 5T35 | SDQ50/74 | FOTON Oling |
| NISSAN ZF5S400V | SDQ51/44 | NISSAN | ||
| ZheJiang | MSB-5M(A2Q05) LC5T88(6 teeth) | ISUZU QINGLING | SDQ51/62 | ISUZU QINGLING |
| ZheJiang | MSB-5M(A2Q05) LC5T88(6 teeth) | ISUZU QINGLING | SDQ51/63 | ISUZU QINGLING |
| DN3-70030-E0 6MT1420 | DN3 | SDQ51/65 | ISUZU QINGLING | |
| ISUZU QINGLING | MSB-5S/5M/5SM 5MT1280JD JC526T3D | 1571 5T88 | SDQ51/74 | JMC small |
| WLY | WLY5TS32C-58-32 | Xihu (West Lake) Dis.feng | ||
| WLY5TS32-31-32 | Xihu (West Lake) Dis.feng | |||
| HangZhou | JC528T8 | 1571 5T88 | SDQ51/67 | JMC |
| ZheJiang | ISUZU MRB6P( EURO3) | SDQ52/74 | ISUZU QINGLING | |
| ZheJiang | MRB6Q MLD6Q | 5T ISUZU | SDQ52/77 | ISUZU QINGLING |
| FAST | 8JS85E 17JK-G18569(JiangKai) | 85E | QD40A | FAST, Xihu (West Lake) Dis.feng |
| RT-11609A RT-11509C | SDQ211/70-A | Xihu (West Lake) Dis.feng, FAW,Xihu (West Lake) Dis.n IVECO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN Xihu (West Lake) Dis. Runze Special Vehicle |
||
| 17G0A9-22 9JS135T-B | SDQ211/70-1 | |||
| 9JS119T-B(170571-K14E3) | SDQ211/70-3 | |||
| 9JS119TA | SDQ211/70-4 | |||
| RTO-11609B RT-11509F | SDQ211/70-5 | |||
| 12JS160TA | SDQ212/70-1 | Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.n IVECO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN | ||
| 12JD160TA 12JD180T | SDQ212/70-2 | |||
| A5J38T | QC20A | FOTON | ||
| NAVECO | 17H30 | tictrucks | IVEVO NAVECO | |
Power take-off products
Model list of power take-off
FAW Xihu (West Lake) Dis. power take off (FAW PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-YQ12/68 |
1.24 |
250 |
CA6T-123/TS6-53 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-YQ12/72 |
1.199 |
250 |
CA6T-123/TS6-53 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-YQ13/70 |
1.08 |
300 |
CATS6-75A/1700940-680 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-YQ15/75 |
1.006 |
350 |
CATS6-75(74), TZ1700940H4G,CA6T-138 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-YQ15/52 |
1.179 |
400 |
CA6T138 |
Internal spline / flange |
Pneumatic (dynamic clutch) |
Xihu (West Lake) Dis.feng series power take off (DF PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-DF21/33 |
1.044 |
250 |
17C-00030,17G0A4-08, |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-DF22/47 |
1.2 |
600 |
Dt0690 overdrive |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-DF22/47-A |
1.03 |
600 |
Dt0690 overdrive |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-DF24/42 |
1.2 |
600 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-DF24/42-B |
1.03 |
450 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-DF24/45 |
1.2 |
600 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-DF24/45-B |
1.03 |
450 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-DF24/65 |
1.06 |
400 |
DF6S-750 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-DF24/64 |
1.06 |
400 |
DF6S750/DF6S650 |
Internal spline / flange |
Pneumatics |
|
10 |
SDQ-DF24/69 |
1.211 |
350 |
17K1/17KT6K-00030, 17K17-00030/17G1A7-15, 17K23-00030/17G0A7-15 |
Internal spline / flange |
Pneumatics |
|
11 |
SDQ-DF25/63 |
1.23 |
350 |
17G1A7-41/17F40(44/62) /17g0a7-21 (41) / jiangft 650H |
Internal spline / flange |
Pneumatics |
|
12 |
SDQ-DF26/31 |
1.45 |
350 |
DC6J70T/17G0A3-08(09/15/ 25/96)/Zqc6t-75 / 750 |
Internal spline / flange |
Pneumatics |
|
13 |
SDQ-DF27/21 |
1.845 |
350 |
DC85JTZ/17G0Z56-571/17G 0A3-33(35/36)/17G571-N9 002/14G0A3-32(34) /DC6J85TZ |
Internal spline / flange |
Pneumatics |
|
14 |
SDQ-DF27/53 |
1.35 |
350 |
17G0A9-Z67D/DC7J100TB/1 7G0A9-45(-24-00030) |
Internal spline / flange |
Pneumatics |
|
15 |
SDQ-DF27/55 |
1.216 |
300 |
17g0a3-32 (33 / 34 / 35 / 36) straight Connecting gear / dc6j85tz (direct gear) |
Internal spline / flange |
Pneumatics |
|
16 |
SDQ-DF27/65 |
1.07 |
350 |
DC7J100TC,17G0A9-Z66D |
Internal spline / flange |
Pneumatics |
|
17 |
SDQ-DF27/66 |
1.26 |
350 |
Dc6j85tz (overdrive) /17G0A3-54/170571-A9000 |
Internal spline / flange |
Pneumatics |
|
18 |
SDQ-DF28/55 |
1.3 |
400 |
17GOA3-38/17N29-00030 |
Internal spline / flange |
Pneumatics |
|
19 |
SDQ-DF28/65 |
1.55 |
350 |
Dc7j120tb (overdrive) /01-00030 |
Internal spline / flange |
Pneumatics |
|
20 |
SDQ-DF28/72 |
1.84 |
350 |
Dc7j120tc (direct gear) /01-00030 |
Internal spline / flange |
Pneumatics |
Jac Xingrui series power take off (JAC)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-XR50/35 |
1 |
300 |
LC6T55 WLY6TS55 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-XR50/45 |
1.1 |
280 |
LC6T46/LC6T450 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-XR50/60 |
1.1435 |
300 |
LC6T540 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-XR50/63 |
1.11 |
300 |
LC6T540/15CO7571 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-XR50/65 |
1.6433 |
250 |
ML642A-A9 |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-XR50/67 |
1.1541 |
250 |
ML532A |
Internal spline / flange |
Pneumatic / manual |
|
7 |
SDQ-XR50/69 |
1.1 |
280 |
LC6T46/LC6T450 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-XR50/71 |
1.17 |
200 |
LC5T97/LC5T30 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-XR50/74 |
1.03 |
200 |
LC5T35/LC5T40 |
Internal spline / flange |
Pneumatics |
|
10 |
SDQ-XR23/55 |
1.12 |
300 |
LC6T450M1 |
Internal spline / flange |
Pneumatic / manual |
|
11 |
SDQ-XR37/77 |
1.55 |
200 |
ML532C |
Internal spline / flange |
Pneumatic / manual |
Qingling CZPT series power take off (Isuzu PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WS51/62 |
1.3 |
150 |
Msb-5m / starray lc5t88 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WS38/63 |
1 |
150 |
Msb-5m / starray lc5t88 |
Internal spline / flange |
Pneumatic / manual |
|
3 |
SDQ-WS32/64 |
1.095 |
300 |
MYY-6S |
Internal spline / flange |
Pneumatic / manual |
|
4 |
SDQ-WS35/74 |
1.63 |
180 |
MSB-5M/MSB-5S/MSB-5SM/LC5T88
LC5T25/LC5T255M3/LC5T28 |
Internal spline / flange |
Pneumatic / manual vacuum |
|
5 |
SDQ-WS52/77 |
1.18 |
250 |
MLD-6Q/MLD6A |
Internal spline / flange |
Pneumatics |
JMC series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-GT32/65 |
1.26 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
2 |
SDQ-GT51/67 |
1.2 |
200 |
JC5T28/5T26.5/MTI280JD |
Internal spline / flange |
Pneumatic / manual |
|
3 |
SDQ-GT32/65-A |
1.315 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
4 |
SDQ-GT32/65-B |
1.09 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
5 |
SDQ-GT32/65-C |
1.26 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
ZF series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-ZF51/38 |
1.077 |
300 |
ZF6S500/ZF6S600/ZF6S558 ZF6S508/ZF6S458 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-ZF51/44 |
1 |
250 |
ZF5S400 |
Internal spline / flange |
Manual |
|
3 |
SDQ-ZF48/39 |
1.063 |
250 |
ZF5S408/ZF5S328 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-ZF211/65 |
0.772 |
650 |
TraXon12 |
Internal spline / flange |
Pneumatics |
Fast PTO power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-FS212/70 |
0.94 |
600 |
12JSD160TA |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-FS212/70-A |
0.78 |
600 |
12JSD160TA |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-FS19/31 (QD40A) |
1.09 |
400 |
8JS75 |
Internal spline |
Pneumatics |
|
4 |
SDQ-FS24/37 ( QCZ70A) |
0.93 |
600 |
6J80T |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-FS211/60 |
1.1 |
350 |
6DS40TB-D/6DS60TB-D |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-FS211/70 |
0.94 |
600 |
Fuller / fast / rt-11509c 8JS100S/17G0A9-22 |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-FS211/70-A |
0.78 |
600 |
Fuller / fast / rt-11509c 8JS100S/17G0A9-22 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-FS34/29 |
400 |
8JS75 |
Internal spline / flange |
Pneumatics |
WanLiYang series power take off (WLY PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WL24/37 |
1.176 |
250 |
10H30 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WL24/38 |
1.077 |
300 |
6G55 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-WL24/40 |
1.333 |
300 |
6G40A |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-WL31/39 |
1.1 |
300 |
6G40A |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-WL24/43 |
1.087 |
300 |
5G40 |
Internal spline / flange |
Pneumatic / manual / vacuum |
|
6 |
SDQ-WL24/44 |
1.043 |
300 |
6G40B |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-WL24/59 |
1.094 |
300 |
6G120/6G70 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-WL24/60 |
1.3 |
300 |
6TS40 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-WL24/63 |
1.39 |
180 |
5TS32 |
Internal spline / flange |
Pneumatic / manual |
|
10 |
SDQ-WL 24/63-B |
1.39 |
180 |
5G32A |
Internal spline / flange |
Pneumatic / manual |
|
11 |
SDQ-WL 24/66 |
1.359 |
180 |
5TS32-C |
Internal spline / flange |
Pneumatic / manual |
|
12 |
SDQ-WL 24/66-B |
1.146 |
180 |
5G32B/5G32C |
Internal spline / flange |
Pneumatic / manual |
|
13 |
SDQ-WL 24/67 SDQ-WL 25/67 |
1.147 |
300 |
6T120/6S46/6S51 |
Internal spline / flange |
Pneumatics |
|
14 |
SDQ-WL 24/70 |
1.15 |
200 |
6S46B (2015-4-25) |
Internal spline / flange |
Pneumatic / manual |
|
15 |
SDQ-WL 24/71 SDQ-WL 25/71 |
1.11 |
300 |
6S51B/6S46B |
Internal spline / flange |
Pneumatic / manual |
|
16 |
SDQ-WL 24/72 |
1.133 |
300 |
6TS55E/6TS60 |
Internal spline / flange |
Pneumatic / manual |
|
17 |
SDQ-WL23/63 |
1.35 |
350 |
10H46 |
Internal spline / flange |
Pneumatics |
|
18 |
SDQ-WL23/71 |
1.15 |
400 |
7TS60 |
Internal spline / flange |
Pneumatics |
|
19 |
SDQ-WL24/75 |
1 |
400 |
7TS60B |
Internal spline / flange |
Pneumatics |
|
20 |
SDQ-WL25/70 |
1.244 |
400 |
7TS60C |
Internal flange / spline |
Pneumatics |
|
21 |
SDQ-WL24/73 |
1.07 |
400 |
7TS60D |
Internal spline / flange |
Pneumatics |
|
22 |
SDQ-WL25/33 |
1.228 |
350 |
10h46 (right) |
Internal spline / flange |
Pneumatics |
|
23 |
SDQ-WL27/70 |
1.08 |
150 |
5TS40 |
Internal spline / flange |
Pneumatics |
|
24 |
SDQ-WL31/46 |
1.2 |
180 |
5TS40 |
Internal spline / flange |
Pneumatics |
|
25 |
SDQ-WL211/100 |
1 |
1000 |
9G90 |
Internal spline / flange |
Pneumatics |
SINOTRUCK CZPT PTO power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-ZD27/61 |
1.1 |
600 |
DC7J120T |
Flange flange |
Pneumatic (dynamic clutch) |
|
2 |
HW50 |
0.739 |
500 |
HW14710/HW18710 HW15710/HW19710 |
Internal flange / spline |
Pneumatics |
|
3 |
HW70 |
0.793 |
700 |
HW18709/HW18710 |
Internal spline / flange |
|
|
4 |
HW80Q-F301 |
800 |
HW9571C1 |
Flange flange |
Pneumatics |
|
|
5 |
HW140Q-F301 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
6 |
HW140Q-F302 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
7 |
HW140Q-F303 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
8 |
HW140Q-F305 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
9 |
HW60Q-F300 |
0.686 |
600 |
HW12706 |
Flange flange |
Pneumatics |
Other series of power take-off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-HL211/65 |
0.772 |
650 |
Soda gearbox 12sob1500 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-HL211/100 |
1 |
1000 |
Soda gearbox 12sob1500 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-NQ42/26 |
1.15 |
150 |
NAC 2830.5 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-NQ42/27 |
1.15 |
150 |
NAC 2830.5 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-SQ42/77 |
1.13 |
300 |
SAIC sc50m6d |
Internal spline / flange |
Pneumatics |
New energy Electric Power Truck series power take off PTO
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-LK31/38 |
1.043 |
300 |
HangZhou green control 6s100 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-LK24/36 |
1.136 |
300 |
HangZhou green control j6s95 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-LK20/56 |
1.148 |
300 |
HangZhou green control j2s130 |
Internal spline / flange |
Pneumatics |
Export series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
Pto1000 series |
0.6- 1.88 |
300 |
EATON FS 3005/4005 EATON 6305 |
Internal flange / spline |
Pneumatics |
|
2 |
Pto2000 series |
0.6- 1.88 |
350 |
Eaton fuller CZPT rt-11109a / rt-6609a rt-7608a Allison Ellison M-5600/M-6600/S-5600 S-6600 |
Internal spline / flange |
Pneumatics |
|
3 |
3131(BZ) |
0.84-2.9 4 |
450 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
4 |
3252(BZ) |
0.81-1.8 5 |
300 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
5 |
3151(BZ) |
0.84-2 |
540 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Constant mesh |
|
6 |
3300 |
0.74-1 |
390 |
Allison Ellison MD-1000/MD-2000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
7 |
PTO852 |
1.13 |
650 |
Allison |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
8 |
103K_03(BZ) |
0.77-0.55 |
650 |
ZF ZF S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
|
9 |
1571K_03 (BZ) |
0.76 |
420 |
ZF ZF S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
Gearbox manufacturer code (see Table 1 for details)
|
Gearbox manufacturer code |
|||
|
Code |
Explain |
Code |
explain |
|
WS |
ZheJiang CZPT gearbox Co., Ltd |
ZD |
Sinotruk HangZhou gearbox Co., Ltd |
|
ZF |
HangZhou ZF CZPT gearbox Co., Ltd |
FS |
ZheJiang Fashite automobile transmission Co., Ltd |
|
AS |
Allison transmission Co., Ltd |
SQ |
ZheJiang Automotive Transmission Co., Ltd |
|
ET |
Eaton (ZheJiang ) gearbox Co., Ltd |
NQ |
HangZhou Automobile Gearbox Co., Ltd |
|
DF |
Xihu (West Lake) Dis.feng (HangZhou) gearbox Co., Ltd |
LK |
HangZhou lvkong transmission Co., Ltd |
|
YQ |
Gearbox branch of CZPT Xihu (West Lake) Dis. transmission division |
HL |
ZheZheJiang oda transmission Co., Ltd |
|
HY |
HangZhou CZPT automobile transmission Co., Ltd |
GT |
Getrac (ZheJiang ) transmission system Co., Ltd |
|
WL |
ZHangZhoug WanLiYang Co., Ltd |
XR |
ZheZheJiang ngrui gear transmission Co., Ltd |
|
ZZ |
Sinotruk Xihu (West Lake) Dis. gearbox Co., Ltd |
HD |
ZHangZhoug Xihu (West Lake) Dis.feng Gear Co., Ltd |
|
HC |
HangZhou Xihu (West Lake) Dis. gearbox Group Co., Ltd |
QJ |
Xihu (West Lake) Dis. Gear Transmission Co., Ltd |
|
LG |
Fudong CZPT automobile bridge box Co., Ltd |
ZM |
ZHangZhoug Zhongma automobile transmission Co., Ltd |
|
ZC |
HangZhou Gear Co., Ltd |
LQ |
HangZhou Qingfu transmission Co., Ltd |
|
CQ |
ZheJiang Qingfu transmission Co., Ltd |
SR |
Shengrui transmission Co., Ltd |
|
JF |
Jiefu Transmission Technology Co., Ltd |
||
Certificaciones
Embalaje y envío
Preguntas frecuentes
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.
2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.
3. What’s the delivery time and can you lower the price?
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
4.Can you supply some quick-wear parts?
Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
6.Do you have any used products for sale?
We have products in stock for choices,the prices are favorable,we’ll show you our stock products if you need.
7.What’s the payment terms?
TT 30% as deposit, balance before shipment by TT or at sight.
8. How to guarantee customers get the goods smoothly after they payment?
Don’t worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don’t delivery products, the deposit will be returned to you.
9.How can you ensure the quality of the products?
Don’t worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.
There are 5 commonly used wrecker tow truck , usually depending on the type or size of the recovery wrecker :
First type : Boom towing truck
– use adjustable arms and winches to retract vehicles from ditches, embankments, or any vehicle that cannot arrive safely. Some booms are fixed, some heavy rotating racks, hydraulic telescopic tubes, others. In the past boom, trucks used the “hook chain” system, the chain around the frame or axle, and then hoisted by the winch. A heavy rubber pad is attached to the truck and truck so that it can be towed CZPT other bridges.” Slings and belts are an evolution, replacing parts of chains with rubber belts. slings did not use too much today because they could shave bumper cars. But they are sometimes used in wrecker accidents carrier or have 1 or 2 front wheels or rear wheels missing or pickups and other vehicles have steel bumpers. Equipped with all wheel drive, the truck is towed away, unable to use the machine string, because it can make the car power transmission system problems.
Second type :Wheel lift wrecker towing truck
(also called “glasses”) – from the chain hook technique to generate a large metal frame, can be installed in the front or rear under the cradle, rendering vehicles by pneumatic or hydraulic hoist can drag the ground clear front or rear. The device usually picks up the wheel of the vehicle (i.e., front wheel, if it is front wheel drive, rear wheel, if it is rear wheel drive), and contacts the tire. wheel lift wrecker tow truck are common in china; cradles are like glasses. Medium and heavy-duty trucks use variations, “underlift” or “chassis lift”, in which the elevator shaft or frame is not the wheel. A forklift truck can be used as an adapter or a lift chassis.
Third type :Integration towing truck (also known as “Self Loader wrecker equipment“, “Snatcher towing vehicle“, “quick choice tow truck” or “roll back wrecker“) – the arm and wheel lift together. Used of light trucks to recover or stop vehicles. Most of the truck’s cab equipment is controlled so that the pickup truck does not leave the truck to connect the vehicle. heavy trucks are also manufactured using integrated lifts.
Forth type –Flat plates wrecker truck (also known as “rolling back tow truck” or “sliding tow truck“) – the entire back of the truck is fitted with a bed that can be hydraulically tilted down to the ground, allowing the vehicle to be placed under its own power or pulled up by the winch. [9] because they carry, rather than traction vehicles, it can be completely fixed; in the United States, they carry serious damage to car accidents.
Fifth type —Lifting platform wrecker truck the derricks lift the vehicle vertically and use the wheel lift to load it on the bed. In Europe, this car can eliminate the parallel parking of vehicles.
| Solicitud: | Motor, Machinery, Agricultural Machinery, Car, Hydraulic Gear Pump Crane ( Oil Pump, Fuel Pump |
|---|---|
| Función: | Distribution Power |
| Gearbox 1: | 17kt6K-00030, 17g0a7-15(Jiangshan), 17jk35-00030 |
| Pto: | Sdq24/69 Sdq24/71, Sdq24/70, Sdq24/69-1 |
| Transmission 1: | 17g1a7-15, 17jk07-00030-E, 17FT67-00030, 17D100-00 |
| Transmission 2: | 646b, Mly6s51b-20b-00, Wly6ts55b-63-32, Wly6s51b-2 |
| Muestras: |
US$ 580/Piece
1 pieza (pedido mínimo) | |
|---|
| Personalización: |
Disponible
| Solicitud personalizada |
|---|
Choosing the Right PTO Shaft For Your Tractor
There are a number of different PTO shaft types available for your tractor. These include the North American, German and Italian styles. They are also available in various series, each with different options for bearing diameter and cap-to-cap overall length. To choose the best shaft for your tractor, it’s important to know what kind of tractor you own and the type of PTO that you need.
IID shaft
When it comes to choosing the best IID shaft for your PTO, the selection process can be a challenge. Whether you are replacing the shaft in your own tractor or need to purchase one for a client, there are several factors to consider. The right PTO shaft for your tractor should be compatible with the equipment you currently use. For instance, a shaft that can be used in a farm tractor will fit a different farm tractor than one used in a construction machine.
First of all, a safety shield is a critical part of your IID shaft. The shielding will help keep the entire shaft free of any potential hazards. Typically, shielding will cover the straight part of the shaft, universal joints, and PTO connection. A shield can also help protect you from injury if you accidentally run into the shaft or touch the guard.
A power take off shaft will be the best choice if you are using a tractor for other applications, such as mowing, shredding, or plowing. A PTO shaft is also a crucial part if you own a large tractor or implement. It will allow you to operate your equipment with maximum efficiency.
An IID shaft is designed to slide into another piece when the tractor’s PTO is engaged. A disconnected IID shaft can pull the two pieces apart and cause the tractor to swing uncontrollably when it is engaged. This can cause serious injuries or even death. You should not engage a PTO if you aren’t certain of its strength.
To ensure the safety of the driveline shield, check for proper alignment of the PTO shaft. If it isn’t aligned properly, foreign materials can enter the shaft bearings. A damaged driveline shield can also lead to driveline separation, particularly when the tractor is making sharp turns or downhills. In addition, improper alignment of the drawbar may damage the protective shield that protects the shaft.
Choosing the right PTO series size requires proper measuring of each part. Measure the length of each yoke outside the PTO shaft and determine the appropriate PTO series size. The PTO yoke size chart can be helpful when choosing the correct size for your tractor.
Toma de fuerza inversa
Many different applications call for a reverse PTO shaft. These adapters allow the PTO shaft to be turned in the opposite direction of the engine, matching the rotation of the power take-off to the rotation of the equipment it drives. They can be used to space the power take-off away from the transmission case and improve clearance for a direct-coupled pump or driveshaft.
Reverse PTO shafts are available for CZPT . They are designed for six-spline 540-rpm applications. They also offer the option of multi-speed operation. Reversed PTOs are a great option for implements that can get stuck.
Reverse PTOs can be used on most types of PTO. The reverse version has a gearbox that allows it to rotate backward. These are ideal for implements that can get stuck in a field. A reverse PTO shaft makes it possible to work with the implement without having to wait for it to get unstuck.
When using a PTO, it’s important to know which type of gearbox is needed. If you have an older model, you’ll probably need a reverse PTO shaft. These are generally used on older, vintage tractors with ground drive PTO. The ground speed pTO shafts match the speed of the tractor’s final drive, so when the tractor is in reverse, the gearbox will turn backward. This feature will not function if you’re working stationary, though.
A tractor with a reverse PTO is important for a number of reasons. For example, the reverse PTO can help you turn a stuck tractor in the opposite direction, which is useful when a piece of farm equipment becomes stuck in mud or when you need to push a stuck implement back. In addition, it allows you to use the tractor’s power to operate various implements. The reverse PTO also helps you know how much power is needed to run various implements on various terrain.
In addition to being convenient, reverse PTO shafts also help reduce the risk of damage to implements attached to the PTO. It’s vital to keep a PTO shaft in good working order.
Eje cuadrado rígido
When you are looking for a new square rigid PTO shaft, you should consider a few factors. Choosing the right one can be a challenge, as the process is not always simple. For instance, there are a lot of choices when it comes to different brands and interpretations. You can even choose to purchase a square rigid shaft that is not square.
Torsional rigidity is a measure of the ability of a shaft to resist torsional forces. The higher the value of J, the more rigid the shaft will be. For example, a steel shaft has a higher torsional rigidity than an HDPE shaft. The correct value of J can have a big impact on the design decisions.
Another factor to consider is the type of shaft coupling. Rigid shaft couplings are best for shafts that are perfectly aligned. While flexible couplings are flexible enough to accommodate small misalignments, they are not as flexible as the flexible ones. Rigid shaft couplings, which are typically made of metal, are not designed for high-speed rotation.
Rigid couplings are a good choice for a wide range of applications. Rigid couplings are available in many sizes and configurations, and can be used with either a powered or an unsupported shaft. Rigid couplings are also available with keyways to transmit torque.
Torsional rigidity depends on the geometry of the components. A higher torsional rigidity means a shaft is more resilient to twisting. However, excessive twisting can result in unstable performance. As a result, it is important to avoid over-twisting a shaft.
Flange couplings are another option. These couplings have two flanges that are attached to each other with bolts or nuts. They are very similar to split muff couplings and sleeve couplings. The difference is that flange couplings have two flanges – one for the shaft and one for the coupling hub.
If you are thinking about purchasing a square rigid PTO shaft for your tractor, be sure to consider the features that will best serve your specific needs. While you may be considering the price of this new shaft, remember that it is a machine part that could be dangerous.
Toma de fuerza económica
There are several standard types of PTO shafts. They can vary in diameter and number of splines, and are designed to work with a specific speed range. The following are the main differences between these types. Choosing the right type for your application will depend on its application. One of the most important considerations to make when choosing a PTO shaft is the ratio between the shaft’s diameter and the toothed wheels that are attached to it.
When choosing a PTO shaft, consider the amount of torque you need. In general, an economy PTO shaft should be able to support a maximum load of 540 Nm. In addition, it should be able to handle a high-speed output. An economy PTO shaft may need less torque than a high-performance model.
Economy PTO shafts come in two basic styles: North American and Italian. These two types are designed to provide constant-speed output and balance the power input of a tractor. There are also various other styles of PTO shafts available, including square and rectangular half-shaft assemblies. You can also purchase extra parts to repair a worn PTO shaft.
The control/monitoring unit in a PTO includes a screen display and a manual control for selecting engaged or disengaged PTO states. In addition, there is a switch in the cab mounted control unit 14 that selects normal and economy modes when driving the PTO. These modes utilize different gears to achieve the desired PTO shaft revs.
To select the right PTO speed, select the lever in economy mode and increase the throttle to the appropriate rpm. The PTO speed should be 540 RPM. The control/monitoring unit 14 will use this information to adjust the clutch control parameters. In addition to the PTO speed, it will also display the torque on the PTO shaft.
Economy PTO shafts are ideal for a variety of applications. These PTOs allow the tractor to run at lower rpms, thereby reducing noise and vibrations. They are typically available in both hydraulic and mechanical types.
editor by CX 2023-05-30
